1 of 4

Performance Brake Fluids

Brake Fluid absorbs moisture. This lowers the boiling point, which creates vapour due to the heat generated in braking. This vapour could lead to a complete failure of the brakes.

Article No.: 4000

OWS 300 Racing Brake Fluid Dot 4

Specifications

U.S. FMVSS No.116 DOT 4; Typical Dry Boiling Point: 312ºC (594ºF); Typical Wet Boiling Point: 204ºC (399ºF)

Fully Synthetic High-Performance Racing Brake Fluid with elevated dry boiling point

300 Racing Brake Fluid Dot 4 has been specially formulated to provide outstanding performance under racing conditions where braking systems must operate at very high temperatures. For best results bleed the system with fresh fluid before each race, especially if the brakes are excessively hot and/or the conditions are humid. Do not mix with other brake fluid.

Article No.: 4041

OWS Über Power Sports Brake Fluid Super Dot 4.1

Specifications

ISO 4925; SAE J1703; Ford Sam 6C9103A; MB 7760 Type DOT 4 plus; Fiat; GM GME L5 104; Jaguar; Porsche; Renault 41-02-001; VW Tl 766 X/Y DOT 4

Fully Synthetic High-Performance Brake Fluid with elevated dry boiling point

Uber Power Sports Brake Fluid Super Dot 4.1 is a 100% Fully Synthetic High-Performance Brake Fluid with elevated dry boiling point of 280°C and wet boiling point of 198°C. Enhanced corrosion protection for all hydraulic brake systems. For use in hydraulic clutch systems, according to manufacturer’s instructions.

Article No.: 4001

OWS Über Power Brake Fluid Dot 4 LV

Specifications

FMVSS 116 DOT 4; SAE J1703/ 1704; ISO 4925 Class 6

100% Fully Synthetic Brake Fluid DOT 4 LV

High Performance low viscosity brake fluid with elevated dry boiling point of 280ºC  and wet boiling point of 198ºC. Enhanced corrosion protection for all hydraulic brake systems. For use in hydraulic clutch systems, according to manufacturer's instructions.

Article No.: 4051

OWS Über Power Racing Brake Fluid Super Dot 5.1

Specifications

FMVSS 116 DOT 3/DOT 4 / DOT 5.1; SAE J1703/ 1704; ISO 4925 Class 5.1

100% Fully Synthetic Brake Fluid Super DOT 5.1

Top Performance fully synthetic brake fluid with extremely high wet boiling point, providing enhanced corrosion protection. Design for use in hydraulic brake system in passenger cars and motorcycles according to manufacturer's instructions.

Article No.: 4003

OWS Über Power Brake Fluid Dot 3

Specifications

DOT 3- SAE J1703

100% Fully Synthetic Brake Fluid DOT 3

Brake Fluid for hydraulic brake and clutch systems according to manufacturer's instructions.